English
Français
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
-
The paper machine steam dryer rotary joint in different size Scope of application: Maximum speed: ≤100RPM Maximum temperature: ≤220 ℃ Maximum pressure: ≤1.8MPa Applicable medium: saturated steam, superheated steam, superheated water
-
The paper making felt wet suction box made by stainless steel and ceramic 1. face board: Long strip board with rake angle, horizontal support surface and backward inclination angle. The bottom is made into various tongue and groove shapes to match the connection bracket. The face board requires a ...
-
The customized stainless steel baffle with ceramic for the paper making felt sensor Technical Parameters: Stand size: 600mm x 500mm Material: The valve body is made of national standard tin bronze, the valve core is 304 stainless steel, the bracket is stainless steel, and the bottom plate is carbon ...
-
High molecular polyethylene(HDPE)faceboard made for the vacuum suction box / forming board After the slurry is formed on the net and preliminary dewatering, its dryness and tightness gradually increase, and the resistance to dehydration increases. To continue dewatering on the net, a method of high ...
-
Customized Paper Machine Parts cast iron felt /wire Pneumatic Corrector with rubber made air spring Including a base, a movable seat, a corrugated pneumatic tire, a guide rail bearing seat and an adjusting device, the guide rail bearing seat is slidably arranged on the movable seat, and the ...
-
Customized Napkin Tissue Paper Toilet Paper Embosser Rolls Steel To Wool useage toielt paper machine/napkin paper machine size customized material wool/steel A little carelessness during the forming process of the embossing roll will cause bubbles to appear on the surface of the embossing roll. This ...
-
7. D shaped continuous hydropulper system for the waste carton paper recycling D type hydraulic pulper is designed on the basis of existing traditional pulper with reference to foreign advanced technology. Its main feature is that the volts rotor is off-center, making the paper material contact the ...
-
The Whole Stainless Steel Reject Sortor Machine For Second Stage Of Coarse Pulp Cleaning In The Stock Preparation 1. Introduction Features: This machine is mainly used for the treatment of tailings in the screening section of the waste paper system. The incoming pulp concentration is about 1-3%, and ...
You Might Be Interested In
